after ex parte appeal
on 27 Mar 2006
Last Applicant/ Owned by
11403 Cronridge Drive
Owings Mills
MD
21117
Serial Number
76507736 filed on 18th Apr 2003
Registration Number
N/A
Correspondent Address
JAMES J. MEREK
Filing Basis
1. use application currently
Disclaimer
NO DATA
The mark consists of a three-dimensional configuration of a six-wheeled elevator roller guide in combination with the colors red and black. The drawing is lined for the color red. The base, excluding the wheels, nuts, bolts, pins, springs, and washers, is in the color black. The roller guide consists of three main components: the base mounting bracket, the central hub and the pivot arms. Each Read More
elevator roller guides
31st Dec 1961
31st Dec 1961
No 76507736
No Service/Collective Mark
No TR-71
No
No
No
No
No
No
No
No
15.01.02 -
Other machines for industry; industrial installations
29.03.01 -
Red or pink
29.03.11 -
Black
The mark consists of a three-dimensional configuration of a six-wheeled elevator roller guide in combination with the colors red and black. The drawing is lined for the color red. The base, excluding the wheels, nuts, bolts, pins, springs, and washers, is in the color black. The roller guide consists of three main components: the base mounting bracket, the central hub and the pivot arms. Each pivot arm holds two wheels, mounted at the extreme and opposite ends of the arm. The two "side" pivot arms are identical, and consist of two parallel, generally diamond-shaped faces, connected in the middle by an elongated cylinder. Oval holes at the center of each face of the pivot arm reveal the springs and some inner workings of the guide. The third pivot arm is disposed between the other two pivoting arms and is rotated approximately 90 degrees relative to the other arms. This "face" pivot arm consists of two parallel faces, each shaped in an angular, three-section, wide-spread U configuration. These two planes are attached to each other in two places near the angles of the U shape. All three pivot arms are attached at their middles to a central hub, which consists of a cylindrical section attached to four flat rectangular surfaces. The base includes a substantially planar platform and two main support sections, reinforced with angled ribs down the sides, that connect to a cylindrical top section of the base. This top cylinder receives the hub's cylinder. The two main supports are divided by a large, somewhat rounded, but generally rectangular hole. The wheels depicted by dotted lines do not form any part of the mark in this application
Status Date | Action Taken |
---|---|
05th Apr 2006 | ABANDONMENT NOTICE MAILED - AFTER EX PARTE APPEAL |
27th Mar 2006 | ABANDONMENT - AFTER EX PARTE APPEAL |
27th Mar 2006 | EXPARTE APPEAL TERMINATED |
19th Sep 2005 | EX PARTE APPEAL-INSTITUTED |
11th Mar 2005 | FINAL REFUSAL MAILED |
10th Mar 2005 | FINAL REFUSAL WRITTEN |
10th Feb 2005 | AMENDMENT FROM APPLICANT ENTERED |
21st Jan 2005 | CORRESPONDENCE RECEIVED IN LAW OFFICE |
21st Jan 2005 | PAPER RECEIVED |
21st Jul 2004 | NON-FINAL ACTION MAILED |