PINNACLE Canadian Trademark Information

Industrial screwdriver bits and accessories; tungsten carbide grit-edged saw blades; chisels and retainers for pneumatic tools; bandsaw blades; hand and power backsaw blades, reciprocating saws and jigsaw blades; holesaws; files; chisels; riveters; engineer's hand tools; hand magnets; magnetic clamps and tools; permanent magnetic chucks and lifters; magnetic assemblies; rawhide, nylon, gar-dur, urethane hammers and mallets; keyways and special broaches; hex keys, long arm, short arm "T" type handles and sets; micrometers and precision measuring tools, pneumatic sanders, grinders, filers, saws, needle scalers and bevellers; hydraulic punchers and magnetic autom drillers, heavy-duty pneumatic tools namely, grinders, impact wrenches, drivers, drills, vaccum, sand rammers and hoists; shim stock, drill rods, flat and rectangular keystock, threaded rods; magnetic drill stands and cutters; steel letter and figure marking punches, and interlocking brass stencils. Industrial screwdriver bits and accessories; tungsten carbide grit-edged saw blades; chisels and retainers for pneumatic tools; bandsaw blades; hand and power backsaw blades, reciprocating saws and jigsaw blades; holesaws; file...

Perfect for these industries

Words that describe this mark

industrial screwdriver bits accessories tungsten carbide gritedged saw blades chisels retainers pneumatic tools bandsaw blades hand power backsaw blades reciprocating saws jigsaw blades holesaws files chisels riveters engineers hand tools hand magnets magnetic clamps tools permanent

Abandonment Notice! On Wednesday, September 17, 2008, status on the PINNACLE trademark changed to Registration cancelled. Apply Now for this name starting at $449!

CAUTION: Although Canada registration for this particular filing is inactive, the mark may still enjoy common law rights, or may have been applied for again in a separate application. Further research may be warranted to determine where this mark is truly abandoned in commerce.

On Wednesday, August 30, 1995, a canadian trademark registration was filed for PINNACLE by STRONGRIDGE INC., *********, **********, ***** ****. The Canadian IP office has given the trademark application number of 791528. The current status of this trademark filing is Registration cancelled. The PINNACLE trademark is filed in the description of Industrial screwdriver bits and accessories; tungsten carbide grit-edged saw blades; chisels and retainers for pneumatic tools; bandsaw blades; hand and power backsaw blades, reciprocating saws and jigsaw blades; holesaws; files; chisels; riveters; engineer's hand tools; hand magnets; magnetic clamps and tools; permanent magnetic chucks and lifters; magnetic assemblies; rawhide, nylon, gar-dur, urethane hammers and mallets; keyways and special broaches; hex keys, long arm, short arm "T" type handles and sets; micrometers and precision measuring tools, pneumatic sanders, grinders, filers, saws, needle scalers and bevellers; hydraulic punchers and magnetic autom drillers, heavy-duty pneumatic tools namely, grinders, impact wrenches, drivers, drills, vaccum, sand rammers and hoists; shim stock, drill rods, flat and rectangular keystock, threaded rods; magnetic drill stands and cutters; steel letter and figure marking punches, and interlocking brass stencils. , Industrial screwdriver bits and accessories; tungsten carbide grit-edged saw blades; chisels and retainers for pneumatic tools; bandsaw blades; hand and power backsaw blades, reciprocating saws and jigsaw blades; holesaws; files; chisels; riveters; engineer's hand tools; hand magnets; magnetic clamps and tools; permanent magnetic chucks and lifters; magnetic assemblies; rawhide, nylon, gar-dur, urethane hammers and mallets; keyways and special broaches; hex keys, long arm, short arm "T" type handles and sets; micrometers and precision measuring tools, pneumatic sanders, grinders, filers, saws, needle scalers and bevellers; hydraulic punchers and magnetic autom drillers, heavy-duty pneumatic tools namely, grinders, impact wrenches, drivers, drills, vaccum, sand rammers and hoists; shim , Industrial screwdriver bits and accessories; tungsten carbide grit-edged saw blades; chisels and retainers for pneumatic tools; bandsaw blades; hand and power backsaw blades, reciprocating saws and jigsaw blades; holesaws; files; chisels; riveters; engineer's hand tools; hand magnets; magnetic clamps and tools; permanent magnetic chucks and lifters; magnetic assemblies; rawhide, nylon, gar-dur, urethane hammers and mallets; keyways and special broaches; hex keys, long arm, short arm "T" type handles and sets; micrometers and precision measuring tools, pneumatic sanders, grinders, filers, saws, needle scalers and bevellers; hydraulic punchers and magnetic autom drillers, heavy-duty pneumatic tools namely, grinders, impact wrenches, drivers, drills, vaccum, sand rammers and hoists; shim stock, drill rods, flat and rectangular keystock, threaded rods; magnetic drill stands and cutters; steel letter and figure marking punches, and interlocking brass stencils. .

Get FREE email alerts

100% Satisfaction Guarantee

protect your valuable brand now.

Classification Information

Class Code:	011 - Environmental Control Instrument Products (lighting, heating, cooling, cooking)
Description:	Environmental control items
Class Code:	016 - Paper Goods and Printed Material
Description:	Paper and printed goods
Class Code:	018 - Leather Products (not including clothing)
Description:	Leather and artificial leather goods
Class Code:	019 - Non-Metallic Building Material Products
Description:	Non-metallic building materials
Class Code:	024 - Fabrics
Description:	Textiles and textile goods
Class Code:	006 - Metal Products
Description:	Common metals
Class Code:	007 - Machinery Products
Description:	Machinery
Class Code:	008 - Hand Tool Products
Description:	Hand tools
Class Code:	009 - Computer & Software Products & Electrical & Scientific Products
Description:	Electrical, scientific and teaching apparatus and software

Matter History Events

Status Date	Record Status Description
2008-09-17	National prosecution history entry - Expunged - Non-use
2005-05-12	National prosecution history entry - Rep for Service Changed
1998-09-18	Registration published - Registered
1996-12-06	National prosecution history entry - Allowed
1996-12-06	National prosecution history entry - Allowance Notice Sent
1996-09-11	Application published - Advertised
1996-08-02	Application accepted - Approved
1996-02-06	National prosecution history entry - Correspondence Created
1996-02-06	National prosecution history entry - Examiner's First Report
1995-11-25	National prosecution history entry - Search Recorded
1995-09-21	Filing date accorded - Formalized
1995-09-07	National prosecution history entry - Created
1995-08-30	Application filed - Filed

Word Mark:	PINNACLE
Current Status:	Registration cancelled DEAD Mark! Start a New Filing Request 9/17/2008
Application Number:	791528
Filing Date:	Wednesday, August 30, 1995
Filing Place:	Canada
Registration Date:	Friday, September 18, 1998
Registration Number:	TMA500972
Register Type:	Primary
Type Of Mark:	Trademark
Mark Feature:	Word
Use In Commerce:	Yes
Publication Registration:	Wednesday, September 11, 1996
Opposition:	9/11/1996 - 9/11/1996
Last Applicant/Owner:	STRONGRIDGE INC., ******* ****** * **
Correspondent:	Not provided

Goods and Services Information
Description:	(1) - Industrial screwdriver bits and accessories; tungsten carbide grit-edged saw blades; chisels and retainers for pneumatic tools; bandsaw blades; hand and power backsaw blades, reciprocating saws and jigsaw blades; holesaws; files; chisels; riveters; engineer's hand tools; hand magnets; magnetic clamps and tools; permanent magnetic chucks and lifters; magnetic assemblies; rawhide, nylon, gar-dur, urethane hammers and mallets; keyways and special broaches; hex keys, long arm, short arm "T" type handles and sets; micrometers and precision measuring tools, pneumatic sanders, grinders, filers, saws, needle scalers and bevellers; hydraulic punchers and magnetic autom drillers, heavy-duty pneumatic tools namely, grinders, impact wrenches, drivers, drills, vaccum, sand rammers and hoists; shim stock, drill rods, flat and rectangular keystock, threaded rods; magnetic drill stands and cutters; steel letter and figure marking punches, and interlocking brass stencils. (2) - Industrial screwdriver bits and accessories; tungsten carbide grit-edged saw blades; chisels and retainers for pneumatic tools; bandsaw blades; hand and power backsaw blades, reciprocating saws and jigsaw blades; holesaws; files; chisels; riveters; engineer's hand tools; hand magnets; magnetic clamps and tools; permanent magnetic chucks and lifters; magnetic assemblies; rawhide, nylon, gar-dur, urethane hammers and mallets; keyways and special broaches; hex keys, long arm, short arm "T" type handles and sets; micrometers and precision measuring tools, pneumatic sanders, grinders, filers, saws, needle scalers and bevellers; hydraulic punchers and magnetic autom drillers, heavy-duty pneumatic tools namely, grinders, impact wrenches, drivers, drills, vaccum, sand rammers and hoists; shim (3) - Industrial screwdriver bits and accessories; tungsten carbide grit-edged saw blades; chisels and retainers for pneumatic tools; bandsaw blades; hand and power backsaw blades, reciprocating saws and jigsaw blades; holesaws; files; chisels; riveters; engineer's hand tools; hand magnets; magnetic clamps and tools; permanent magnetic chucks and lifters; magnetic assemblies; rawhide, nylon, gar-dur, urethane hammers and mallets; keyways and special broaches; hex keys, long arm, short arm "T" type handles and sets; micrometers and precision measuring tools, pneumatic sanders, grinders, filers, saws, needle scalers and bevellers; hydraulic punchers and magnetic autom drillers, heavy-duty pneumatic tools namely, grinders, impact wrenches, drivers, drills, vaccum, sand rammers and hoists; shim stock, drill rods, flat and rectangular keystock, threaded rods; magnetic drill stands and cutters; steel letter and figure marking punches, and interlocking brass stencils.

Perfect for these industries

Words that describe this mark

a canadian trademark registration was filed for by . The Canadian IP office has given the trademark application number of . The current status of this trademark filing is . The correspondent listed for is The trademark is filed in the description of .

Trademarkia is the largest search engine for U.S., China, European Union, Canada, and Australia Trademarks. Each month hundreds of trademarks around the world are filed by licensed attorneys in the Trademarkia network law firms! You can register your trademark in 180+ countries in the world through Trademarkia Network. Trademarkia.com is a free search engine of publicly available government records. Trademarkia.com is not a law firm and does not represent owners & correspondents listed on this page.

100% Satisfaction Guarantee

protect your valuable brand now.

How it works

1. Trademarkia Network Law firm - #1 Trademark Filing since 2010.

2. Describe how your business or product is being used. Register your mark in 180+ countries.

What you get

1. Top Global Specialist - Credibility and Experience!

2. All processes will be performed in a timely manner. You will be informed periodically about the process.

What our customers say:

I wasn't too sure what to expect when taking up services, but the professionalism from the site to the customer service is the slickest I have ever experienced.

Camryn, Surrey, UK

How it works

1. Trademarkia Network Law firm - #1 Trademark Filing since 2010.

2. Describe how your business or product is being used. Register your mark in 180+ countries.

What you get

1. Top Global Specialist - Credibility and Experience!

2. All processes will be performed in a timely manner. You will be informed periodically about the process.

What our customers say:

I wasn't too sure what to expect when taking up services, but the professionalism from the site to the customer service is the slickest I have ever experienced.

Camryn, Surrey, UK

What You Can Do:

Start Your Business

Get FREE email alerts

Add to Favorites

Start Canada Trademark Filing

Custom Logo Design $99

Search on popular social networks

This mark may be available for re-registration. You can apply for it through Trademarkia at a low cost of $449!

Trademarkia.com will perform a final search in order to verify that this mark is available for Canada Trademark re-registration. All Trademarkia services are backed by a 100% satisfaction guarantee.

Trademarkia lets you see how your personal name, product name, trademark name or username is being used on any of 530+ new and popular social networks. Be the first to reserve your name and get help stopping others from using it - all in one place!

As seen on