tm logo
Dead/Cancelled
IR CANCELLED; US REGISTRATION CANCELLED

on 19 Nov 2022

Last Applicant/ Owned by

CH-8408 Winterthur

CH

Serial Number

79124066 filed on 19th Nov 2012

Registration Number

4590648 registered on 26th Aug 2014

in the Principal Register

Correspondent Address

Kistler Holding AG

Intellectual Property

Eulachstrasse 22

CH-8408 Winterthur

SWITZERLAND

Filing Basis

No Filing Basis

Disclaimer

THE SHAPE OF THE CUTOUT OF THE INNER SECTION OF THE TUBE, THE NOTCHES ON THE UPPER AND/OR LOWER SIDE AND THE EXACT PROPORTION OF LENGTH TO CROSS SECTION DIMENSIONS

Logo Mark Trademark Information

THE SHAPE OF THE CUTOUT OF THE INNER SECTION OF THE TUBE, THE NOTCHES ON THE UPPER AND/OR LOWER SIDE AND THE EXACT PROPORTION OF LENGTH TO CROSS SECTION DIMENSIONS The mark consists of a three-dimensional configuration of a hollow profile used for vehicle weigh-in motion sensors; the profile is a long round tube surrounding an inner section with two specially designed blocks, a lower block and anRead More

Classification Information


Class [009]
Computer & Software Products & Electrical & Scientific Products


Measuring apparatus and instruments, namely, profiles for weigh-in-motion sensors for vehicles; signaling apparatus and instruments, namely, profiles for weigh-in-motion sensors for vehicles; apparatus for recording, transmission, processing, storage and reproduction of measurement data; calculation machines; data processing equipment

Mark Details


Serial Number

No 79124066

Mark Type

No Service/Collective Mark

Attorney Docket Number

No

44D Filed

No

44D Current

No

44E filed

No

44E Current

No

66A Filed

No

66A Current

No

Current Basis

No

No Basis

No

Design Code(s)

26.19.25 -

Other geometric solids

Description of Design Search

The mark consists of a three-dimensional configuration of a hollow profile used for vehicle weigh-in motion sensors; the profile is a long round tube surrounding an inner section with two specially designed blocks, a lower block and an upper block inside the tube, having flat parallel sides opposed to each other; further, the tube is sandwiched between two exposed plates, a base plate and a top plate, which are wider than the diameter of the tube.

Legal History


Show more

Status DateAction Taken
17th Jun 2023DEATH OF INTERNATIONAL REGISTRATION
17th Jun 2023NOTIFICATION OF EFFECT OF CANCELLATION OF INTL REG MAILED
12th Dec 2021TOTAL INVALIDATION PROCESSED BY THE IB
13th Nov 2021TOTAL INVALIDATION OF REG EXT PROTECTION SENT TO IB
13th Nov 2021INVALIDATION PROCESSED
12th Nov 2021TOTAL INVALIDATION OF REG EXT PROTECTION CREATED
12th Mar 2021CANCELLED SECTION 71
19th Dec 2014FINAL DECISION TRANSACTION PROCESSED BY IB
02th Dec 2014FINAL DISPOSITION PROCESSED
02th Dec 2014FINAL DISPOSITION NOTICE SENT TO IB